RotoMet Babbitting Putty-
Putty
used to dam Babbitt / Pewters or any other Alloys before pouring as well as many other applications. May be
reused if kept clean. Non-toxic and asbestos free.Resistant to heat and cold, free from moisture, holds tight, remains
plastic and retains molten Babbitt and other low melting materials.
Easily packed in place and is reusable. May be used as damming or
impression material. Non-toxic and asbestos free.Available in 1-lb, 5-lb or 30-lb
blocks. Babbitrite®
A damming, molding, positioning compound
- Resistant to heat, cold, weather – free of moisture
- Holds tight, remains plastic and retains molten Babbitt and low
melting point materials
- Is easily packed in place and reusable
- casting
low melting point alloys and lead: Babbitrite® receives the impression from a
casting and is used in positioning delicate parts. It is also used as a
dam when pouring gates and vents to hold the molten alloy in position
until it hardens. Babbitrite® helps produce chuck jaws and dimensional
samples.
- stop
off compound: for containing in lead alloy in the fabrication
of lead punches and dies and to prevent low melting point alloys from
contacting locating surfaces on shuttle bases.
- air
conditioning and refrigeration: for sealing openings, joints
and electrical leads around coolers and air-conditioning units.
Babbitrite® remains flexible and in place when firmly applied.
- zinc
crushers: in replacing mantles and bowl liners. Babbitrite® is
used to dam all openings while molten zinc is poured for backing up the
mantles and bowl liners.
- building installations: for sealing fan frames, air ducts, and openings
through walls.
- machinery installations: used as a retainer when pouring 190F asphaltum in
machine settings.
- soldering:
holds solder while soldering wires on generators.
- splash
welding: used as a shielding dam to protect operator and
material from cutting compounds.
- welding
and braising: protects motors and machine parts and aids in
positioning.
- leaded
pipe joints: retainer and tunnel material for molten lead for
ball and spigot pipes.
- chocker
sockets: used as a mold material in fastening wire ropes.
- heat treating: for coating machined surfaces to prevent scaling
while in furnace. It is easily and quickly removed with minimal labor costs.
|
